For custom asphalt solutions you can trust, look no further than Albina Asphalt.

We manufacture and distribute asphalt for both small businesses and large contractors in Oregon, Washington, and California.

We source the highest-quality base material and then modify it for your individual needs. Paving roads in the high desert? We’ve got an asphalt mixture that can stand the heat. Looking for asphalt that works well at high elevations? We’ve got a mix for that too.

Our asphalt is a cut above the rest due to our rigorous quality-assurance procedures. Throughout the manufacturing process, our quality control teams test each product, guaranteeing a finished material that meets your specific requirements upon delivery.

If you don’t see the product you need below, contact our team to learn about our custom product development services.

TitleDescriptionDownloads 
PG 58-22A M320 PG graded binder. Can be used in mild climate and low volume roads. Also used in RAP mixes. Spec Sheet SDS Sheet
PG 58H-22

Same as PG 64-22. Washington State uses AASHTO M332 specification. Also used as a binder for underlayment fabric prior to overlay

Spec Sheet SDS Sheet
PG 58V-22

A M332 graded PG binder. Used on the west side of Washington State and is a modified binder meeting WSDOT’s current specifications.

Spec Sheet SDS Sheet
PG 58-28

A M320 PG graded binder. Can be used in mild climate and low volume roads. Also used in RAP mixes.

Spec Sheet SDS Sheet
PG 58S-28

A M332 graded PG binder. It is non modified binder meeting WSDOT’s current specifications primarily used in RAP mixes.

Spec Sheet SDS Sheet
PG 58-34M

A highly modified M320 low temperature PG binder for the state of California.

Spec Sheet SDS Sheet
PG 64-10

Paving Grade for manufacturing of hot mix

Spec Sheet SDS Sheet
PG 64-16

Paving Grade for manufacturing of hot mix

Spec Sheet SDS Sheet
PG 64-22

Paving Grade Asphalt used in Western Oregon in milder climate

Spec Sheet SDS Sheet
PG 64-22ER

A M320 PG graded binder with a plus specification for Elastic Recovery on RTFO material at 25C.

Spec Sheet SDS Sheet
PG 64-28

Paving Grade Asphalt for use in dense-graded asphalt concrete pavement in cooler climates.

Spec Sheet SDS Sheet
PG 64S-28

A M332 graded PG binder. Used on the east side of Washington State and is a non modified binder meeting WSDOT’s current specifications.

Spec Sheet SDS Sheet
PG 64H-28

A M332 graded PG binder. Used on the east side of Washington State and is a modified binder meeting WSDOT’s current specifications.

Spec Sheet SDS Sheet
PG 64V-28

A M332 graded PG binder. Used on the east side of Washington State and is a modified binder meeting WSDOT’s current specifications.

Spec Sheet SDS Sheet
PG 64-28ER

A M320 PG graded binder with a plus specification for Elastic Recovery on RTFO material at 25C. It is used in cooler temperature climate with high traffic volumes.

Spec Sheet SDS Sheet
PG 64-28M

A highly modified M320 PG Binder for the State of California.

Spec Sheet SDS Sheet
PG 64-34ER

A M320 PG graded binder with a plus specification for Elastic Recovery on RTFO material at 25C. It is used in cold temperature climate with high traffic volumes.

Spec Sheet SDS Sheet
PG 70-10

A M320 PG graded binder. Typically used where the temperature is hot and does not get very cold.

Spec Sheet SDS Sheet
PG 70-22

Paving Grade Asphalt designed for use in dense-graded concrete pavement.

Spec Sheet SDS Sheet
PG 70-22ER

A M320 PG graded asphalt binder with a plus specification for Elastic Recovery on RTFO residue material. Typically used in hotter climates or higher traffic loading.

Spec Sheet SDS Sheet
PG 70-28

Recommended for hotter/colder climates such as Eastern Oregon

Spec Sheet SDS Sheet
PG 70-28ER

A M320 PG graded binder with a plus specification for Elastic Recovery on RTFO material at 25C. It is used in a hot to cold temperature climate with high traffic volumes.

Spec Sheet SDS Sheet
PG 76-22

A M320 PG graded binder used in high temperature climates or heavy traffic.

Spec Sheet SDS Sheet
PG 76-22ER

A M320 PG graded binder with a plus specification to ensure there is polymer modification. The binder has a minimum RTFO Elastic Recovery 60% at 25C.

Spec Sheet SDS Sheet
AC -15P

A polymer modified, hot applied, chip seal binder formulated with select binder stock and special polymers to insure lasting adhesion of the chip aggregates to the existing pavement. Can be adjusted within the specification given your climatic region.

Spec Sheet SDS Sheet

Didn’t find what you’re looking for? Please contact us!

We're happy to answer questions or take your suggestions for new products!